Original Xbox Power & Eject Button
Original price was: € 9,95.€ 2,49Current price is: € 2,49. incl. Vat
The two front-panel buttons on an Original Xbox take more abuse than any other part of the case, and a cracked, sticking or missing power or eject button turns a working console into an annoying one.
Condition Used, tested and fully functional
9 in stock
The two front-panel buttons on an Original Xbox take more abuse than any other part of the case, and a cracked, sticking or missing power or eject button turns a working console into an annoying one. These are genuine parts pulled from Xbox consoles, tested for correct action and finish.
Cheap fix, visible result — worth doing on any console you are restoring.
What's in the box
- 1x power button and 1x eject button
- No screws, no PCB
Installation
Difficulty: Easy. Tools: Torx driver for the housing screws. No soldering. Time: 15-20 minutes, most of which is opening and closing the case.
The buttons sit in the front bezel and come out once the top housing is off. Clean the seats while you are in there — trapped dust is often what makes a button feel sticky in the first place.
Compatibility
Fits the standard Original Xbox chassis colour scheme in silver/grey.
| Weight | 0,004 kg |
|---|---|
| Colour | Silver / grey |
| Fits | Original Xbox front bezel |
| Condition | Used, tested and fully functional |
| Weight | 0.004 kg |
Specifications
| Parts | Power button, eject button |
|---|---|
| Colour | Silver / grey |
| Fits | Original Xbox front bezel |
| Condition | Used, tested and fully functional |
| Weight | 0.004 kg |
De aansluiting. Het frontpaneel hangt aan een connector van tien pinnen in twee rijen van vijf, waarop ook de beide leds zijn aangesloten.
Only logged in customers who have purchased this product may leave a review.
Frequently asked questions
My eject button does nothing at all. Then your problem is probably the switch or the PCB behind it, not the button plastic. Look at Original Xbox PCB Power and Eject.
My power button feels mushy but works. That is usually grime in the bezel seat. Try cleaning before buying.
Do these come in other colours?
Are they new? No — genuine used pulls, tested and functional.
Related products
Accessories
Skeleton Key is a free toolkit for the Original Xbox that bundles the tools most people end up hunting down one at a time — softmodding, diagnostics, content management and Insignia setup — behind a single boot menu.
Condition New
All Products
A perished drive belt is the single most common reason an Original Xbox DVD tray refuses to open, opens halfway, or grinds and retracts.
Condition New
All Products
A genuine Delta DPSN-96AP-1, the internal power supply used in the Original Xbox.
Condition Used, tested, fully functional; minor cosmetic wear possible
All Products
The Delta AUB0712HH is one of the 70mm fans Microsoft fitted to the Original Xbox.
Condition Genuine OEM pull, tested
All Products
The yellow power lead that runs from the Original Xbox motherboard to the DVD drive.
Condition Genuine OEM pull, tested, may show light wear
All Products
If you are putting a new hard drive in an Original Xbox, the ribbon cable is not the place to cut corners.
Condition New
Accessories
An Original Xbox controller lead is about 2.7 metres, which was generous in 2001 and is not generous now that the TV is across the room.
Condition New, unused
All Products
A Nidec E35163-55MIC — one of the OEM 70mm fans Microsoft fitted to the Original Xbox.
Condition Genuine OEM pull, tested
Reviews
There are no reviews yet.