Replacement TPU Feet with screw hole
Original price was: € 9,95.€ 4,95Current price is: € 4,95. incl. Vat
- 1.0: past
- 1.1: past
- 1.2: past
- 1.3: past
- 1.4: past
- 1.6: past
- 1.6b: past
Weet je niet welke je hebt? Zo zoek je het in vijf minuten uit.
Original Xbox feet perish. The rubber goes hard, cracks, or vanishes entirely somewhere in the console's twenty-plus years — and a bare plastic case slides around and drums against the shelf.
Condition 3D printed
11 in stock
Original Xbox feet perish. The rubber goes hard, cracks, or vanishes entirely somewhere in the console’s twenty-plus years — and a bare plastic case slides around and drums against the shelf. These are custom-designed 3D-printed replacements in TPU: flexible, grippy and tough, with the screw hole left open so you can still get to the case screws underneath.
That detail matters on the Original Xbox, where several of the housing screws hide beneath the feet. Solid replacement feet mean cutting them off again the next time you open the console. These do not.
What's in the box
- 4x 3D-printed TPU feet
- No screws (see Related)
Installation
Difficulty: Easy. No soldering. You need a T20 screwdriver if you are refitting the case screws through them, and something to clean out the old adhesive residue — isopropyl alcohol and patience. Press each foot into its recess; it holds by friction and by the screw. If you want them permanent, a drop of glue works, but leaving them removable is the smarter choice on a console you may open again.
Ten minutes for a set.
Compatibility
Designed for Original Xbox consoles. The case is the same shape across all board revisions, so fitment is unaffected by whether the console inside is a 1.0 or a 1.6b.
| Weight | 0,006 kg |
|---|---|
| Dimensions | 3,5 × 1,5 × 0,5 cm |
| Quantity | 4 per set |
| Screw hole | Yes, open |
| Dimensions | 3.5 × 1.5 × 0.5 cm |
| Weight | 0.006 kg |
| Condition | 3D printed |
Specifications
| Material | TPU (thermoplastic polyurethane) |
|---|---|
| Quantity | 4 per set |
| Screw hole | Yes, open |
| Dimensions | 3.5 × 1.5 × 0.5 cm |
| Weight | 0.006 kg |
| Condition | 3D printed |
| Colour |
Only logged in customers who have purchased this product may leave a review.
Frequently asked questions
Are screws included? No. The Original Housing Screws Set covers those.
Do I have to glue them? No. They can be left removable, which is what most people want. Glue only if you are done opening the console.
Will they mark my furniture? TPU is a soft, non-marking material.
Do they fit the original recesses exactly? They are designed for them — see the VERIFY note above on whether all four positions are identical.
Related products
All Products
The yellow power lead that runs from the Original Xbox motherboard to the DVD drive.
Condition Genuine OEM pull, tested, may show light wear
All Products
Everything you need to softmod an Original Xbox, in one package: a USB stick with Rocky5's Xbox Softmodding Tool already written to it, plus the USB-to-Xbox adapter that lets you plug that stick into a controller port.
Condition New
All Products
The metal bracket that locates the DVD drive inside an Original Xbox.
Condition Genuine OEM pull, may show light cosmetic wear
All Products
If you are putting a new hard drive in an Original Xbox, the ribbon cable is not the place to cut corners.
Condition New
All Products
The two front-panel buttons on an Original Xbox take more abuse than any other part of the case, and a cracked, sticking or missing power or eject button turns a working console into an annoying one.
Condition Used, tested and fully functional
All Products
A genuine Original Xbox front controller port assembly — the module carrying two of the console's four controller sockets.
Condition Genuine OEM pull, tested, may show light cosmetic wear This product has multiple variants. The options may be chosen on the product page
All Products
The stock Original Xbox fan is the loudest thing in the console, and after two decades of dust and dry bearings it usually gets worse.
All Products
A used Original Xbox v1.6a motherboard, tested and working.
Condition Used, tested — requires a recap
Reviews
There are no reviews yet.