Sunon PKD1207PTV1-A Fan

Original price was: € 14,95.Current price is: € 7,95. incl. Vat

Gebruikt, getest

Past op deze moederbordrevisies

1.0: past
1.1: past
1.2: past
1.3: past
1.4: past
1.6: past
1.6b: past

Weet je niet welke je hebt? Zo zoek je het in vijf minuten uit.

A genuine Sunon PKD1207PTV1-A cooling fan, pulled from an Original Xbox and tested working.

Condition Used, tested, fully functional

1 in stock

A genuine Sunon PKD1207PTV1-A cooling fan, pulled from an Original Xbox and tested working. This is one of the 70mm units Microsoft used in the console, so it is a straight swap for a stock fan that has started ticking, whining, or spinning down.

If you would rather go quieter than stock, look at the Noctua route instead. If you want the console to sound and behave exactly as it left the factory, this is the part.

What's in the box

1x Sunon PKD1207PTV1-A fan, used and tested
No shroud, no screws

Installation

Difficulty: Easy. Tools: Torx driver for the housing, Phillips for the fan mount. No soldering if the connector is intact. Time: 15 minutes.

Note the airflow direction arrow on the fan hub before you fit it. Fitting an Xbox fan backwards is a genuinely common mistake and the console will run hot without any obvious symptom until something fails.

Compatibility

70 x 70 x 25 mm, 12V, 3-pin connector — the Original Xbox stock fan format.

Over de fan-aansluiting op het bord. Het moederbord heeft op élke revisie, van 1.0 tot en met 1.6b, dezelfde fan-aansluiting: één rij van drie pinnen. Staat er bij een ventilator "2-pin", dan gaat dat over de stekker aan die ventilator, niet over het bord.

Eerst smeren, dan pas vervangen. Een ventilator die luidruchtig is geworden, is meestal niet stuk maar uitgedroogd. Doorsmeren geeft er vaak een tweede leven aan en kost niets. Helpt dat niet, dan zijn de lagers of de motor versleten en is vervangen de juiste stap. Let ook op dat het geluid van je console net zo goed uit de harde schijf of de dvd-drive kan komen.

Weight	0,64 kg
Dimensions	8,3 × 7,9 × 3,3 cm
Model	PKD1207PTV1-A
Size	70 x 70 x 25 mm
Voltage	12V
Current	0.35A
Connector	3-pin
Condition	Used, tested, fully functional

Specifications

Manufacturer	Sunon
Model	PKD1207PTV1-A
Size	70 x 70 x 25 mm
Voltage	12V
Current	0.35A
Connector	3-pin
Airflow / RPM
Bearing type
Condition	Used, tested, fully functional

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Frequently asked questions

Is this quieter than my current fan? Not by design — it is the stock-spec part. A worn bearing is what makes an old fan loud, so a good tested unit will be quieter than a failing one, but it is not a silent-running upgrade.

Can I undervolt it? Yes, that is a common trick for noise. It also reduces airflow, so do not do it on a console with an upgraded HDD running long sessions.

Will it plug straight in? It should — see the connector VERIFY note.

How do I know which way it should blow? Match the arrow on the hub to the direction the old fan was mounted. Take a photo before removing it.