Genuine Original Xbox Controller Port
Original price was: € 4,95.€ 2,95Current price is: € 2,95. incl. Vat
- 1.0: past
- 1.1: past
- 1.2: past
- 1.3: past
- 1.4: past
- 1.6: past
- 1.6b: past
Weet je niet welke je hebt? Zo zoek je het in vijf minuten uit.
A genuine Original Xbox front controller port assembly — the module carrying two of the console's four controller sockets.
Condition Genuine OEM pull, tested, may show light cosmetic wear
A genuine Original Xbox front controller port assembly — the module carrying two of the console’s four controller sockets. These take a beating: a Duke gets yanked out sideways, the breakaway connector wears, and eventually a port goes intermittent or dead. Rather than reflowing a damaged connector, swap the whole module.
Electrically the Xbox controller port is USB in a proprietary Microsoft housing, with an extra pin for the memory-unit/expansion slots — which is why USB adapters for these controllers are as simple as they are.
What's in the box
- 1× genuine Original Xbox controller port module (2 ports)
Installation
Difficulty: Easy to Moderate. Case open (T20 Torx), remove the DVD drive and HDD for access, unplug the old port module from the motherboard, fit this one, reassemble. No soldering required. Around 30 minutes, mostly reassembly.
Compatibility
Fits all Original Xbox revisions: 1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.6b.
Works with all Original Xbox controllers, including the original Duke, the Controller S, and third-party pads. Memory units and other expansion accessories plug into the top slots as normal.
| Weight | 0,022 kg |
|---|---|
| Lengte | Lang, Kort |
| Ports | 2 |
| Interface | USB-based, proprietary Microsoft connector |
| Fits | Original Xbox, all revisions |
| Controller support | Duke, Controller S, third-party pads, memory units |
| Soldering | Not required |
| Condition | Genuine OEM pull, tested, may show light cosmetic wear |
| Weight | 22 g |
Specifications
| Part | Front controller port assembly |
|---|---|
| Ports | 2 |
| Interface | USB-based, proprietary Microsoft connector |
| Fits | Original Xbox, all revisions |
| Controller support | Duke, Controller S, third-party pads, memory units |
| Soldering | Not required |
| Condition | Genuine OEM pull, tested, may show light cosmetic wear |
| Weight | 22 g |
Only logged in customers who have purchased this product may leave a review.
Frequently asked questions
Only player 1 and 2 are dead. Do I need one module or two? One — each module covers two ports. Order two if the other pair is also faulty.
Is soldering required? No. The module plugs into the motherboard.
Will memory units still work? Yes, the expansion slots are part of the same assembly.
Can I use this to build an Xbox-to-USB adapter? People do exactly that, but if that's your goal we sell purpose-made adapters — see Related.
Related products
All Products
Six genuine Original Xbox housing screws — the T20 Torx case screws that live under the rubber feet and the warranty label.
Condition Genuine OEM
A handmade AV cable that gives the Original Xbox a far cleaner picture than the bundled composite lead.
All Products
A Hitachi-LG GDR-8050L optical drive pulled from an Original Xbox, tested and reading.
Condition Genuine OEM pull, tested, may show light cosmetic wear
Accessories
The Original Xbox controller port is electrically USB 1.1 wearing a proprietary connector.
Condition New
Accessories
An Original Xbox controller lead is about 2.7 metres, which was generous in 2001 and is not generous now that the TV is across the room.
Condition New, unused
All Products
A genuine Sunon PKD1207PTV1-A cooling fan, pulled from an Original Xbox and tested working.
Condition Used, tested, fully functional
All Products
A Nidec E35163-55MIC — one of the OEM 70mm fans Microsoft fitted to the Original Xbox.
Condition Genuine OEM pull, tested
All Products
If you are putting a new hard drive in an Original Xbox, the ribbon cable is not the place to cut corners.
Condition New
Reviews
There are no reviews yet.